Electric Actuated 3 pc SS Ball Valve 24-240V AC/DC 3/8"

Stock #
560403F
Price: $0.00
- +
Valworx 560403F electric actuated 3-piece stainless steel ball valves for on-off control of water, air, oil, and other media compatible with the materials of construction. Unique three piece investment cast bolted body design offers the advantage of a swing out body for easy inline maintenance. Standard unit is power-to-open and power to close, stays in last known position with loss of power. On receipt of a continuous voltage signal, the motor runs and via a flat gear system rotates the ball valve. The motor is stopped by internal cams striking micro switches. On receipt of a reversing continuous signal, the motor turns in the opposite direction reversing the valve position. High temperature valve mounting kit available for extended temperature range or wall mounting applications.
More Information
Actuator Temperature Range-4 to 158°F (-20 to 70°C)
Anti-Condensation Heater4 watts thermostatically controlled
Ball and Stem316 Stainless Steel
Ball SeatsRTFE (reinforced Teflon)
Current Rating0.3A 110VAC, 0.16A 240VAC, 1.28A 24VAC 0.97A 24VDC (full load amps)
Cycle Time9 seconds per 90° rotation (+/- 10% no load)
Duty Cycle0.75
Electrical ConnectionsDIN plugs with cable entry (included), optional 1/2" conduit plugs
EnclosureAnti-corrosive polyamide, SS fasteners
Enclosure RatingIP67 weatherproof, UV protection
Manual OverrideHand knob
Motor ProtectionElectronic over-torque with LED status light
Pipe Size3/8" NPT female
Port SizeFull Port, Orifice 0.49 inches, Cv 10
Pressure Rating1000 PSI CWP non-shock (see P/T chart), Vacuum service to 29"Hg, 25 PSI steam with kit
Stem SealsRTFE (reinforced Teflon)/ Viton
Type2-way On-Off, Valve designed for In-line maintenance
Valve Body316 Stainless Steel
Valve Position Confirmation2 x SPST auxiliary limit switches rated 3A 125/250VAC,30VDC resistive load
Valve Temperature Range0 to 356 °F (-18 to 180 °C)
Voltage24 to 240 Volts AC or DC (1ph, 50/60Hz) auto voltage sensing